Mission Control System
CONTROL SYSTEMS
3D PERFORMANCE IN INTEGRATED FLIGHT TRACKING
You can monitor your unmanned aerial vehicle on the integrated 3D map on the RCS and broadcast your flight data over the network you specify.
-
Mission Control System
Advanced Features
The Mission Control System is controlled by the Mission Control Operator (GCO / Ground Control Operator). The operator is responsible for all aspects of the mission, such as pre-flight checks, mission planning, mission, flight reports, emergency protocols.
The Mission Control Operator is responsibility for conducting the mission smoothly.
Mission Control System provides the operator with all the necessary information to conduct the mission without any problems and without outside assistance. Usually there are two monitors in the system. -
One of the monitors contains the mission definition and operation screen, the other contains the flight information screen and the FPV tail camera image.
The FPV tail camera image can be viewed on the Flight Information Screen and from all authorized computers or screens connected to the system.
TECHNICAL SPECIFICATIONS
- USERFRIENDLY INTERFACE
- TASKPREVIEW
- MULTIPLEUAV SUPPORT
- MISSIONPLAYBACK
- HANDOVERFEATURE
-
FLIGHTPARAMETERS
LIMITABLE
TO BE -
REAL TIMEFLIGHT
CRITICAL INFORMATION
DISPLAY - PRE FLIGHTCONTROLS
-
CLICK
DRAG DROPMETHOD
TASK DESCRIPTION -
SET YOUR FLIGHT DATA
PUBLISH THROUGH
NETWORK -
INTEGRATEDTHREE DIMENSIONAL
(3D) MAP -
BENEFICIALLOAD SERVOS
CONTROL
Follow-up Screen
Mission Control Operator can monitor many data such as TAS and IAS (True and Indicative Air Speed), ground speed, UAV position, artificial horizon, fuel status, battery status, direction, altitude, vario, wind speed, and direction from the Flight Information Screen.
The position and mission points of the UAV can be viewed on the three-dimensional (3D) map, which also contains altitude information, on the Mission Description and Operations Screen.
The Mission Control system also contains separate screens for pre-flight checks and UAV and Tracking Antenna System sensor calibration. The system was designed to improve flight safety and provide an easy-to-use, reliable environment for operators to perform their daily missions smoothly.